Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for League City Homeowners
Lint buildup inside a dryer vent is the leading cause of clothes dryer fires, and it’s a problem that hides behind the wall where nobody looks. In League City, where homes run their dryers hard through long humid summers, that exhaust path clogs faster than most people expect. A dryer that takes two cycles to finish a load, or a laundry room that feels damp after the dryer shuts off, usually points to restricted airflow. Our technicians have up to experience and treat dryer vent cleaning as a dedicated fire-safety service, not a tacked-on extra. We use Rotobrush and Nikro equipment built for the job. Same-day service is often available, and we answer 24/7 at (866) 942-5170.

Dryer Vent Cleaning Service
Dryer Vent Cleaning Service clears the entire exhaust path from the back of your dryer to the exterior termination, removing lint, dust and debris that suction alone leaves behind. You need it when drying times creep up, when the outside vent flap doesn’t open fully, or when it’s simply been a long stretch since the last cleaning. At Duct Cleaning League City, we run a Rotobrush mechanical brush-and-vacuum through the full run, so packed lint gets agitated loose rather than pushed around. A typical single-run dryer vent cleaning in League City runs $120 – $200, with longer or roof-terminated runs landing higher; the written estimate sets the final price. We agree on one flat price per system before any work starts.
Full-Run Lint Removal
We work the whole vent, not just the short section you can reach from the laundry room. Mechanical agitation dislodges the compacted lint sheet that coats the duct walls, and a HEPA-rated vacuum captures the fine particles at the source. That combination matters because lint that stays stuck keeps restricting airflow and keeps feeding the fire risk.
Exterior Termination Check
We confirm the outside flap opens and closes freely and that the termination isn’t blocked by a pest screen packed with debris. A vent that exhausts under a deck or into a tight alcove gets extra attention. If the cap or hood is damaged, we tell you what needs replacing before we finish.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Installation
Dryer Vent Installation covers running a new exhaust path or replacing an unsafe one, and it’s the right call when a vent is crushed, made of flexible foil that kinks, terminates in a crawlspace or attic, or runs so long the dryer can’t push air through it. In League City’s mix of older and newer construction, we routinely find vents routed the short way rather than the correct way. We install smooth rigid ducting and keep the run as short and straight as the house allows. Installation pricing depends on run length and access, so we quote it per job with a written estimate before anything begins. One flat price, agreed up front, with before-and-after photos of the finished path.
Sizing and Routing
A dryer vent needs to match the appliance’s exhaust requirements and stay as direct as the layout permits. Every elbow and every extra foot of run cuts airflow and gives lint a place to settle. We plan the route before we cut anything open.
Safer Materials
We install rigid or heavy semi-rigid metal ducting instead of the thin vinyl flex that traps lint and tears easily. Metal ducting holds its shape, cleans out properly, and doesn’t sag. That choice alone changes how well the vent performs over its life.
Dryer Vent Repair
Dryer Vent Repair fixes the physical failures that cleaning can’t solve: crushed or disconnected duct sections, torn flex, loose joints leaking lint into a wall cavity, and exterior flaps that no longer seal. You need it when the vent run has come apart, when the dryer connection keeps working loose, or when air is clearly not reaching the outside. Duct Cleaning League City handles repair as part of the same visit whenever the problem surfaces during a cleaning, which closes a gap most cleaning-only companies leave open. Repair pricing depends on what’s actually broken, so we document it and put the number in writing before we start. If a repair isn’t needed, we won’t invent one.
Reconnecting and Resealing
Loose joints let lint escape into wall cavities, which is exactly where you don’t want it. We reconnect sections, seal them properly, and confirm the path from dryer to exterior is continuous. A quick test of airflow at the termination tells us the repair worked.
Damaged Duct Replacement
When a section is crushed or torn beyond use, we replace it rather than patch it. Crushed ducting strangles airflow no matter how clean it is inside. We match the new section to the rest of the run so the whole path still performs.
Dryer Vent Cleaning Company
Dryer Vent Cleaning Company matters more than people think, because the equipment behind the service decides the result. This is the only thing we do at Duct Cleaning League City, and we bring contractor-grade tools to it: Rotobrush brush-and-vacuum systems and Nikro HEPA-rated vacuums, the same hardware restoration contractors rely on, not repurposed shop vacs. You need that level of equipment when a vent has gone years without attention or when the home has had pest activity in the laundry area. Routine single-run cleaning in League City runs $120 – $200, and roof-line or long commercial runs cost more; the written estimate sets the final price. One flat price per system, agreed before work starts.
Why the Equipment Matters
Suction alone pulls loose surface dust and leaves the compacted layer stuck to the duct wall. A brush head driven through the run breaks that layer free so it can be captured. HEPA filtration then holds the fine particles instead of blowing them back into your laundry room.
No Bait-and-Switch Pricing
A low advertised number that grows once the technician is on site is the standard complaint in this trade. We quote per system, not per foot or per vent, and we agree the price before we begin. Before-and-after photos of your own vent show what came out.
Dryer Vent Inspection
Dryer Vent Inspection is a documented look at the full exhaust path, not a glance behind the appliance. It covers the dryer connection, the interior run, the exterior termination and the airflow reading at the cap. You need one when you’ve just moved into a home, when the dryer is behaving oddly, when you’ve never had the vent checked, or before a sale closes. In League City, an inspection runs $75 – $150 depending on access and whether the termination is on the roof. The report tells you what’s restricted, what’s failing and what it will take to fix it, in plain language. If a cleaning is all that’s needed, we say so.
Airflow and Moisture Readings
We measure airflow at the exterior termination and check for moisture where it shouldn’t be. A weak reading with a clean-looking vent often points to a crushed section hidden in a wall. Numbers make that visible.
Camera Verification
Where the route is concealed or full of elbows, we can run a camera through the duct to see what’s really there. That’s how you find disconnected joints and nests you’d never catch from either end. We show you the footage.
Commercial Dryer Vent Cleaning
Commercial Dryer Vent Cleaning addresses the stacked and multi-unit dryer banks in laundromats, apartment laundry rooms, gyms, salons and small hotels, where lint volume builds far faster than in a house. You need it on a regular schedule, because commercial dryers run back to back all day and the exhaust path fills accordingly. Duct Cleaning League City handles commercial runs with the same Abatement Technologies containment equipment we use for contaminated environments, which keeps dust from migrating into other areas of the building while we work. Pricing is quoted per building based on the number of dryer runs and their layout, with a written estimate before the job. One flat price, no per-foot surprises.

Multi-Unit Exhaust Banks
Rooftop manifold systems serving several dryers need each individual run cleared, not just the shared duct. We map the whole bank first so nothing gets skipped. A blockage in one branch still affects the others.
Downtime Planning
Commercial dryers earn money only when they run, so we plan the work around your operation. Much of the cleaning can be done from the exterior and the duct chase. We confirm the schedule before we start.
Brands We Service
We work with Guardsman venting components and know where that hardware tends to fail, particularly at the transition fittings where the run meets the dryer. Rotobrush and Nikro make up our core cleaning kit, and knowing that equipment inside and out is what lets us clean a packed vent without damaging the ducting around it. We also carry Abatement Technologies containment gear for jobs with heavy debris or contamination, so fine particles stay captured instead of drifting through the home.
On the air quality side, we service systems equipped with Honeywell and Aprilaire filtration components, meaning we work around high-performance equipment without bypassing or mishandling it. We’re not a dealer and we don’t claim to stock parts. Whether you have Guardsman ducting, a Honeywell air cleaner feeding the same chase, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Clothes still damp after a full cycle. When a load needs a second run, restricted airflow is usually the cause, and a clogged vent is the first place to check. Ignoring it means the dryer works harder and runs hotter while performance drops.
- The dryer feels hot to the touch. A warm cabinet or a hot laundry room after a cycle points to exhaust that can’t escape. Heat that has nowhere to go raises the fire risk inside the venting.
- The exterior flap won’t open. If you can’t feel air moving at the outside termination, the run is blocked or disconnected. That’s a problem worth checking before you run another load.
- A burning or musty smell near the dryer. A scorched smell means lint is sitting against a hot surface; a musty one can mean trapped moisture. Either way, stop using the dryer until someone looks at it.
- Lint collecting around the dryer or on the wall. Escaping lint around joints or behind the appliance signals a leak in the run. It also means lint is accumulating somewhere you can’t see.
Our Process, Step by Step
- 1
Walk-through and airflow baseline. We start by checking the dryer connection and taking an airflow reading at the exterior termination. That number tells us how restricted the run really is before we touch a thing. It’s also the number we compare against when we’re done.
- 2
Containment and protection. Before cleaning, we set up HEPA-rated capture and floor protection so lint and dust don’t land in your laundry room. On heavier jobs we bring Abatement Technologies containment equipment. The goal is simple: everything we loosen gets captured.
- 3
Mechanical brush and vacuum cleaning. We run a Rotobrush brush head through the full length of the vent while the Nikro HEPA vacuum pulls from the other end. The brush dislodges what’s packed onto the walls; the vacuum catches it at the source. We work the run in sections so nothing gets skipped.
- 4
Camera verification and repair. We look back through the duct to confirm it’s actually clear and to catch crushed sections or disconnected joints. If something’s damaged, we can fix it in the same visit. You see what we found before we close it up.
- 5
Final airflow check and photos. We take a second airflow reading and show you before-and-after photos of your own vent. The difference in the reading is the proof the job is done. You’ll also get a plain-language note on what we found.
How Much Does Dryer Vent Cleaning Cost in League City?
Dryer vent cleaning in League City typically runs $120 – $200 for a standard single-run vent, and that range covers most homes in the area. What moves the number is the length and route of the vent, whether it terminates on the roof or through a side wall, how much lint has packed into it, and whether the run is accessible from the exterior. A roof termination with a long vertical climb takes more time and more equipment, so it lands toward the upper end. If the inspection turns up a crushed section or a disconnected joint, repair is quoted separately before any work proceeds.
Flexible foil ducting, common in older construction, tends to trap lint in its ridges and may need partial replacement rather than cleaning alone. Dryers routed into a garage or through a wall cavity with several elbows restrict airflow and stay dirty longer.
To avoid overpaying, ask for a flat price per system rather than a per-foot or per-vent figure. A quote built on feet of venting can expand quickly once a technician is on site. Get the number in writing, and ask whether photos and a post-cleaning airflow reading are included. We include both, along with before-and-after photos of your own vent, so you can see exactly what came out and what the airflow measured before and after.
Our estimates are free and no-obligation, and the written estimate sets the final price. Call (866) 942-5170 for an exact quote.
Our Service Area Near League City
We support homeowners and property managers across League City and the surrounding communities, including Webster, Nassau Bay, Dickinson, Friendswood, Santa Fe, Bacliff, Alvin, San Leon and Seabrook. If your laundry room sits in one of these towns, the same duct and vent service applies, and our team knows the local construction styles that shape how dryer venting is routed. For homes just outside League City, dryer vent cleaning in Webster and dryer vent cleaning in Nassau Bay follow the same standard. When you’re ready, start with our main duct cleaning services in League City or reach out directly.
Serving League City, TX – Our Local Coverage Area
We serve League City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Dryer Vent Cleaning in League City
Dryer vent cleaning removes accumulated lint and debris from the entire exhaust path between your dryer and the exterior termination point. Lint builds up on the duct walls and restricts airflow, which is the leading cause of dryer fires and a common cause of long drying times. In League City, where humid summers keep dryers working hard, that buildup can accelerate. We clean the whole run mechanically and verify airflow afterward. Call (866) 942-5170 for an exact quote; estimates are free.
A standard single-run residential cleaning in League City usually takes about 45 minutes to an hour and a half, depending on vent length and access. Roof-terminated vents or runs hidden inside walls can take longer. If repair is needed, add time for that portion. We’ll give you a realistic window when we book the job.
Routine dryer vent cleaning in League City typically runs $120 – $200 for a single residential run, with roof-line or long commercial systems costing more. A dryer vent inspection runs $75 – $150. Installation and repair are quoted per job once we’ve seen the layout. We agree on one flat price per system before any work starts, and there are no per-foot surprises. Call (866) 942-5170 for an exact quote; estimates are free.
Yes, we work with Guardsman venting components and a range of other dryer venting brands, along with the Honeywell and Aprilaire air filtration equipment sometimes present in the same system. We’re a duct and vent specialist, not a full HVAC contractor, so our work stays within cleaning, repair and installation of venting and ductwork. If we encounter a brand or configuration we can’t service, we’ll tell you upfront.
Same-day service is often available for dryer vent cleaning in League City, subject to scheduling. We answer 24/7, and crews are dispatched Sunday through Friday from 7am to 7pm. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 942-5170 to check availability.
We don’t publish a warranty policy, so any coverage is confirmed in writing at the time of your job. What we can commit to is documentation: before-and-after photos of your own vent plus airflow readings before and after cleaning. If something doesn’t look right afterward, call us and we’ll take a second look.
Clear access to the dryer and the exterior termination before we arrive, which usually means pulling the appliance a few inches from the wall and moving anything blocking the outside vent. Don’t run a load right before the visit. If you know where the vent exits and whether it’s roof or wall terminated, tell us when you book; it helps us plan the right equipment. Call (866) 942-5170 to schedule.
Schedule Your Dryer Vent Cleaning Service in League City Today
Lint in the exhaust path is a fire risk, and it’s one you can close off in a single visit. Call (866) 942-5170 to book dryer vent cleaning in League City with a team that uses professional equipment and puts the price in writing before work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Duct Cleaning League City.